Frequently Asked Questions
Short answers to the questions staff ask most.
Signing in
I forgot my password. What do I do?
Ask the administrator to open Users & roles, edit your account and type a new password. Change it afterwards in My profile.
Why can't I see a menu my colleague has?
Menus depend on your role (System Administrator, Administrator, Supervisor / Pit Manager, Counter Caller, Kiosk / Ticket Issuer). The administrator can change it in Users & roles. After several wrong passwords, sign-in is paused for 15 minutes.
Numbers and the queue
Why doesn't the kiosk ask for an area?
On purpose. Every entry takes one number. The counter caller decides when it may enter Ready, Limber or Heeling.
Does an entry get a new number for each area?
No. The same number is used all day. The caller moves it from area to area (for example Ready → Heeling).
How do the numbers start again?
Numbers restart at 001 every day by themselves. To restart during the day (for example a second derby), open Settings → Tickets → Start numbers again. You can also close the numbers still in the queue.
Can I limit how many numbers are given each day?
Yes: Settings → Tickets → Daily limit (quota). Tick it and enter the number. When the limit is reached, the kiosk shows that numbers are finished for today.
An area is full. What happens when I call another number into it?
Each area can have a capacity (Areas & counters). When a new number is called into a full area, the oldest number inside is released automatically. Set the capacity to 0 for no limit.
What is the difference between Skip, No-show and Cancel?
Skip puts the number aside: call it back later or put it back in line. No-show means the entry did not come and the number leaves the queue. Cancel removes a number given by mistake.
An entry lost the ticket.
At the kiosk tap Lost your ticket? Tap here to print it again, type the number and print. Or the caller reprints it from the calling counter.
Can I write the handler's name on a ticket?
Yes. Use Give a number at the calling counter and type the entry or handler name and a note. You can also edit the name or note of a ticket later. Names are for staff only and never shown on the TV.
Counters and areas
How do I add a second calling counter?
Open Areas & counters and add a counter, for example Counter 2. Each caller then chooses the counter in the calling counter page.
How do I rename an area or add a new one?
Open Areas & counters. There you can rename, add, recolour and reorder areas, and set a short name, a location and the capacity. To release every number in an area at once, press Clear area at the calling counter.
TV display and voice
The TV shows the numbers but there is no sound.
Tap the screen once, or press OK on the TV remote. Browsers play sound only after one tap. Check that the speaker icon at the top right is not crossed out and the TV volume is up. The Windows one-click shortcut and the start-up file play sound without a tap.
The smart TV shows the numbers but there is no voice.
Many smart TV browsers cannot speak. The system then uses the computer voice: the server makes the announcement as a sound file (Windows voices) and the TV plays it. Open the display from the server’s network address. If it stays silent, set Settings → TV display & voice → Voice played by to the computer voice, or add &voice=server to that TV’s link.
Why does the kiosk ask for Ready, Limber or Heeling?
The entry chooses the area it is queuing for, and the number joins that area's line. Numbers still follow one sequence for the whole day. Call next → Ready calls the lowest waiting number that chose Ready. To use one button instead (the counter then decides the area), untick The entry chooses Ready, Limber or Heeling in Settings → Kiosk.
How do I change the voice to Filipino?
Open Settings → TV display & voice. Choose the language Filipino, a male or female voice, and the Filipino wording preset, for example Numero {number}. Pumunta na po sa {area}. Save. The chime (ding-dong, bell, arena horn, three rising notes or none) is set there too. A single TV can also pick its own voice with the microphone button.
How do I show only Heeling on one TV?
In Display & kiosk apps or TV screens setup, choose the Heeling area for that screen. The link then ends with &area= and the area number.
How do I connect six TVs to one PC?
Set Windows to Extend these displays. Open TV screens setup in Chrome or Edge on that PC and press Detect screens. Assign a TV display or kiosk to each screen, then open them all or download the start-up file. Up to 8 screens are supported.
Kiosk and printing
The printer does not print.
Check that the printer is on, has paper and is connected. Then check Settings → Printing: the right way of printing (network printer, printer on the server, Bluetooth / COM, RawBT on Android, or browser) and the right IP address or printer name. With browser printing, make the thermal printer the default printer in Windows and use the one-click shortcut, so it prints without a print window.
How do I print from an Android tablet with a Bluetooth printer?
Install RawBT from Google Play, pair the printer in RawBT and print its test page. In Display & kiosk apps choose RawBT as the way tickets are printed, then open the kiosk link on the tablet.
How do I change what the ticket shows?
Open Settings → Printing → Ticket layout. Tick the parts to show and choose their size. The preview changes as you go. Save the layout.
Network
The Wi-Fi is slow at the counter or kiosk.
Put the access point close to the counter and use 5 GHz Wi-Fi. Give the server a static IP address. Connect the TV PC by cable where you can. The screens download only a few bytes when nothing has changed, so the queue itself uses very little.
Does it need the internet?
No. Everything runs on the local network. The internet is only needed to update an online copy with System Updates or to play an online video.
Backups and updates
How do I back up and move the system to another PC?
Open Backups (System Administrator) and make a full backup package. Download the zip and its installer.php. On the new PC, install XAMPP, put both files in the web folder, open installer.php in the browser and follow the steps.
How do I update the system?
Open System Updates. Connect both copies with the same deploy key. Press Update the other site now to send this site’s files, or Get the other site’s changes to bring them here. A backup is made first.
An update went wrong. Can I undo it?
Yes. In System Updates → Update history press Roll back. It restores the backup taken just before the update.
Will an update overwrite the queue history or settings?
No. config/config.php, the database contents, uploads/ and backups/ are never sent.
Still stuck? See Help or the System Manual.